Diy Peg Mount Kit
Diy Peg Mount Kit
This kit is designed to simplify the process of building floor board style peg mounts for early HD hard tail frames. Kit includes two upper peg mounts and two lower mounts. The upper mount is designed to work with Anderson style pegs and the lower mount bolts to the floor board tabs. Both upper and lower mounts feature a 5/8 diameter socket that allows you to cut and bend 5/8 round stock to fit your specific application these mounts are made out of mild steel. these new lower mounts feature a built in offset which helps get around the cam cover and primary cover easier, They also feature a dropped down edge with helps stop them from rotating forward when you hit a big bump.
Safety & Liability Disclaimer
Motorcycles are inherently dangerous, and modifying them increases the risk of mechanical failure, serious injury, or death. All products sold by Pangea Speed, LLC are intended for show purposes only. These products are not designed, tested, or certified to comply with any federal, state, or local safety or Department of Transportation (DOT) standards and may not be legal for street use.
By purchasing, installing, or using these products, the customer knowingly and voluntarily assumes all risks associated with their use. This assumption of risk and release of liability applies to the customer, any passengers, and any subsequent or future owners of the motorcycle. Pangea Speed, LLC shall not be liable for any injury, death, property damage, or other loss arising from the purchase, installation, or use of these products. Customer agrees to indemnify and hold harmless Pangea Speed, LLC from any claims related to their use.