DIY Peg Mount Kit
DIY Peg Mount Kit
A fabrication kit designed to simplify building floorboard-style foot peg mounts for early Harley-Davidson hardtail frames.
Includes
- Two upper peg mounts
- Two lower mounts
Fitment & Fabrication
- Upper mounts are designed for Anderson-style pegs
- Lower mounts bolt to the factory-style floorboard tabs
- Upper and lower mounts have a 5/8" diameter socket so you can cut and bend 5/8" round stock to fit your specific application
- Mild steel construction
The updated lower mounts have a built-in offset to help clear the cam and primary covers. They also have a dropped edge that helps keep the mounts from rotating forward when you hit a big bump.
Safety & Liability Disclaimer
Motorcycles are inherently dangerous, and modifying them increases the risk of mechanical failure, serious injury, or death. All products sold by Pangea Speed, LLC are intended for show purposes only. These products are not designed, tested, or certified to comply with any federal, state, or local safety or Department of Transportation (DOT) standards and may not be legal for street use.
By purchasing, installing, or using these products, the customer knowingly and voluntarily assumes all risks associated with their use. This assumption of risk and release of liability applies to the customer, any passengers, and any subsequent or future owners of the motorcycle. Pangea Speed, LLC shall not be liable for any injury, death, property damage, or other loss arising from the purchase, installation, or use of these products. Customer agrees to indemnify and hold harmless Pangea Speed, LLC from any claims related to their use.