Airflow Bars
Airflow Bars
Airflow Bars are now made in rust-proof stainless steel, right here in Utah. This updated version is 1.5 inches taller than the old version.
Supplied raw so you can make them your own: leave them raw, polish them, sandblast them, paint them, or powder coat them. The finish is up to you.
- Height: 10 inches
- Width: 27 inches
- Clamping area: 6.75 inches
- Grip area: 8.5 inches
Made in Utah, USA.
Safety & Liability Disclaimer
Motorcycles are inherently dangerous, and modifying them increases the risk of mechanical failure, serious injury, or death. All products sold by Pangea Speed, LLC are intended for show purposes only. These products are not designed, tested, or certified to comply with any federal, state, or local safety or Department of Transportation (DOT) standards and may not be legal for street use.
By purchasing, installing, or using these products, the customer knowingly and voluntarily assumes all risks associated with their use. This assumption of risk and release of liability applies to the customer, any passengers, and any subsequent or future owners of the motorcycle. Pangea Speed, LLC shall not be liable for any injury, death, property damage, or other loss arising from the purchase, installation, or use of these products. Customer agrees to indemnify and hold harmless Pangea Speed, LLC from any claims related to their use.