41mm Narrow Axle
41mm Narrow Axle
This axle is designed to work with our 41mm narrow glide trees or any trees that are around 7in on center and the early style Panhead/gen shovel tapered sliders. You can use this axle with later 41mm sliders but it will require you to drill out the axle hole in the non clamping side.
This Axle is machined from stainless steel so rust is not an issue. This axle is 3/4 (.75in) diameter. The way this axle is designed you can easily turn it down to 5/8 (.625in) or any size in between. K model /early sportster hubs are 17mm (.669in) so you can turn it down to that size as well.
When you buy the trees and axle at the same time a discount will appear at check out.
Safety & Liability Disclaimer
Motorcycles are inherently dangerous, and modifying them increases the risk of mechanical failure, serious injury, or death. All products sold by Pangea Speed, LLC are intended for show purposes only. These products are not designed, tested, or certified to comply with any federal, state, or local safety or Department of Transportation (DOT) standards and may not be legal for street use.
By purchasing, installing, or using these products, the customer knowingly and voluntarily assumes all risks associated with their use. This assumption of risk and release of liability applies to the customer, any passengers, and any subsequent or future owners of the motorcycle. Pangea Speed, LLC shall not be liable for any injury, death, property damage, or other loss arising from the purchase, installation, or use of these products. Customer agrees to indemnify and hold harmless Pangea Speed, LLC from any claims related to their use.