Big twin peg mounts
Big twin peg mounts
NEW TALLER VERSION 2in TALLER. THESE NOW COME IN POLISHED STAINLESS STEEL SO YOU CAN TWEAK THEM IF YOUR FLOOR BOARD TABS ARE IN THE WRONG SPOT (ie: VTWIN FRAME) These Peg Mounts are designed to work with OEM 36-57 HD Rigid frames but they can be used on any frame if you add HD style Floor Board tabs. feature anti spin base plates and set screws for adjusting peg angle. DISCLAIMER!!!!! I have test fitted these mounts on over 10 frames and have found that the floor board tabs are welded on all over the place, especially with after market frames v-twin being the furthest off. I designed these to fit the average OEM frame. if you want your pegs to sit exactly flat you need to be prepared to adjust your floor board tabs to do so, the set screw adjustment will only get you so far. Also these will not work on a cone shovel in a Panhead frame without moving the floor board tabs.
Safety & Liability Disclaimer
Motorcycles are inherently dangerous, and modifying them increases the risk of mechanical failure, serious injury, or death. All products sold by Pangea Speed, LLC are intended for show purposes only. These products are not designed, tested, or certified to comply with any federal, state, or local safety or Department of Transportation (DOT) standards and may not be legal for street use.
By purchasing, installing, or using these products, the customer knowingly and voluntarily assumes all risks associated with their use. This assumption of risk and release of liability applies to the customer, any passengers, and any subsequent or future owners of the motorcycle. Pangea Speed, LLC shall not be liable for any injury, death, property damage, or other loss arising from the purchase, installation, or use of these products. Customer agrees to indemnify and hold harmless Pangea Speed, LLC from any claims related to their use.